Drawing of the plaster head

Drawing of the plaster head

Obrubovka

1) At first we need to define where there will be our head in a sheet of paper (A3 or A2 format). For this purpose we will plan overall dimensions, vymeryav ratios of width and height of the represented object. It is best of all to leave more place from front part.

head obrubovka construction

2) We will plan the total amount of the head further, we will define a foreshortening, finding of front part in your foreshortening.
3) let's divide a face into proportional parts of the face (in this foreshortening the average line of eyes is located on the middle) we will plan a nose tip, a nose bridge, nadbrovny arches, the average line of a mouth, a chin.

head obrubovka construction

4) Let's find an inclination of the head, and the line of front parts in the long term (there is a reduction)
That is closer to us, it seems more that further — it is less, that is it is reduced.

head obrubovka construction

5) Let's find under what corner a nose, a post-swarm axial for front part. We begin with creation of a nose.

head obrubovka construction

Everything depends on our foreshortening if we are below the represented object, we see the lower side of a nose, if to the right of object — the right side of a nose, and frontal, in the long term. (as in ours cases. Here examples of creation of a nose obrubovka.

Obrubovka nose

6) in the same way we will construct also other parts of the face:
Eyes

Creation of the head of the person. Obrubovka

Lips and chin

creation of the obrubovochny head

It is necessary to build all face and the head on sides. And as a result we will receive it:

Method of an obrubovka of creation of the head

WORK ON SHADING
1) Let's define light falls from what party.

obrubovka_postroenie_golovy10

In our case From above on the right.
In that case sides on which direct light the lightest on which the sliding light — is slightly more dark gets, the most dark sides are turned off from light. it is necessary not to forget about reflexes, but they are not lighter than light. If you draw the gibsovy head (as in my case) do not forget about materiality of a gibs. It is necessary to increase boundary contrasts, and to make brighter reflexes and light.
As a result here that will turn out:

Creation of the head of the person. Obrubovka

Examples of obrubovka in other foreshortenings: (Author N. G. Li)

Obrubovka examplesObrubovka examplesObrubovka examplesObrubovka examplesObrubovka examplesObrubovka examplesObrubovka examples

P.S. Thanks to all to whom my lesson was pleasant, I tried. I will be glad to see your robots. And good luck to you in your undertakings and talents. If there are questions on a lesson. I will listen, and than I will help a smog. Izvenite for quality of images (it is made on the mobile phone). The author of the first obrubovka I am Art_Yana. demiart.ru source